 |
 |
 |
| I got the brake side seat rail all fit and tacked and figured the drive side would be a snap to fit since I had a good model to work from...wrong! The left tube above was the first attempt, got the rear loop joint fit nicely then proceeded to cut the other end too short...scrapped. Worked up a second one, got it fit nicely on both joints but after looking at it, the radius on the bend didnt match the brake side rail at all...scrapped. So after two failed attempts I finally got it on the third try. 7 hrs total for one fucking piece of tubing! |
 |
 |
 |
| All its needs it the finish welds and the frame is finally done with the exception if the upper shock mounts. |
